CAPARO CONDUIT TUBE
REQUEST PRICE
Heavy Gauge Conduit Welded – Screwed
Manufactured in accordance with BS 4568 / BSEN50086 / BS EN 61386 / BS 31 where applicable.
Heavy gauge seam welded Conduit (with seam trimmed during manufacture)
Each 3.75 meters length is supplied screwed both ends, plastic cover protection in one end and complete
with one solid coupling at the other end.
Class 4 corrosion protection is achieved with a hot dip galvanised coating applied inside and outside after
the manufacture and offer a high degree of corrosion protection and a bright metallic appearance.
Description
CAPARO GI CONDUIT TUBE – Material handling information
All Caparo Conduit is packed and shipped in lifts (also known as Master Bundles). The approximate weight, number of
lengths and total in meters is given in the table below.
CABLE CAPACITIES OF CONDUIT
The following tables give guidance on the calculation of the number of single-core p.v.c insulated cables which can be
located in various sizes of conduit
(i) Single-core p.v.c. insulated cables in straight runs not exceeding 3 meters in length.
(ii) Single-core p.v.c. insulated cables in straight runs exceeding 3 meters in length or in runs of any length with bends
or sets.
STRAIGHT RUNS NOT EXCEEDING
3 METERS IN LENGTH.
For each type of cable being used obtain the cable factor from Table 1. Sum all the cable factors and
compare with the conduit factors given in Table 2.
The conduit sizes which will accommodate the cables are those with a conduit factor equal to or greater
than the sum of the cable factors.
Brand
CAPARO
Related products
-
ADD TO QUOTEMORE INFOCAPARO RINGS
REQUEST PRICE- Material: Malleable Iron
- 20mm Boxes Minimum 25mm Deep
- 25mm Boxes Minimum 28mm Deep
- Finishes: Galvanised
- 60.3mm Internal Diameter
- Tapped M4 at 50.8mm centres.
- Supplied without covers or fixing screws unless ordered.
- With tapped hole in base for earthing screw.
Reviews
There are no reviews yet.