CAPARO

Caparo Adaptable Boxes are manufactured from steel and are available with plain sides or knock-outs.
The standard finish is Hot Dipped Galvanised. (with Pre-galvanized lids).

20mm and 25mm Boxes Minimum 35mm Deep
32mm Box Minimum 38mm Deep
1.5” Box Minimum 44mm Deep
2” Box Minimum 57mm Deep

Heavy Gauge Conduit Welded – Screwed
Manufactured in accordance with BS 4568 / BSEN50086 / BS EN 61386 / BS 31 where applicable.
Heavy gauge seam welded Conduit (with seam trimmed during manufacture)
Each 3.75 meters length is supplied screwed both ends, plastic cover protection in one end and complete
with one solid coupling at the other end.
Class 4 corrosion protection is achieved with a hot dip galvanised coating applied inside and outside after
the manufacture and offer a high degree of corrosion protection and a bright metallic appearance.

• Material: Malleable Iron
• 20mm Boxes Minimum 25mm Deep
• 25mm Boxes Minimum 28mm Deep
• Finishes: Galvanised
• 60.3mm Internal Diameter
• Tapped M4 at 50.8mm centres.
• Supplied without covers or fixing screws unless ordered.
• With tapped hole in base for earthing screw.